Laser Distance Measuring Device LMC-R-0093Laser distance measuring device LMC-R-0093for measuring on liquid steel

The laser distance measuring system LMC-R-0093 is robustly engineered especially for very harsh industrial applications. The sensor works on basis of the electro-optical Time of Flight (TOF) technology. Therefore this application is equipped with a with hard target detection. So objects with a surface temperature up to 1,650 °C and a limited sight can be measured with a detection rate of 10 Hz. An accuracy of ≤ ±10 mm at 1σ can be realized. Parametrizing of the sensor conducts via its serial interfaces. Optional the sensor can be operated via  Ethernet TCP/IP or analog interface. The sensor is integrated in a robust housing, made of Aluminium. An enhanced use is introduced with the shouldered measuring head. With its help the laser sensor could be situated very close to the measuring object via glas fiber cable.

 

Technical data of the laser distance measuring device LMC-R-0093:System layout of LMC-J-0093

  • Compact design:
    • Dimensions sensor (L x W x H): 200 x 130 x 76 mm
    • Dimensions sensor head (L x W x H): 120 x 80 x 60 mm
    • Weight 3 kg, sensor incl. head
  • Housing made of Aluminium
  • EMV referred to EN 61326-1
  • Laser class 1M (EN 60825-1:2007) wave length λ= 905 nm, divergence 3 mrad
  • Protected against dust and spreading water IP 65
  • Temperature range in the field, sensor -20 °C ... +60 °C
  • Sensor head -40 °C … +80 °C
  • Low power consumption < 5 W
  • Power supply 24 V DC
  • On hot surfaces up to 1,650 °C (liquid steel)
  • Interfaces RS 232 or RS 422, optional Ethernet TCP/IP, Analog output 4 ... 20 mA or 0-10 V available

 

Options:Applikationslayout des LMC-J-0093

  • Protective housing, air purged
  • Shouldered head via glas fiber cable up to 5 m
  • Vortex-cooling for environmental conditions up to +100 °C
  • Heat shield
  • Air purge
  • Heating for temperatures down to -40 °C
  • Customized interfaces (f.e. Ethernet TCP/IP, Analog output)